Select Page

helical worm gear motor

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive solution to impress you with its high level of overall performance and efficiency? If so, we would recommend our high-quality helical-worm gearmotors EP to you. These can be implemented separately in the modular system. In this manner, they offer you a massive range of sizes, gear ratios and electric motor sizes.
However, their greatest strength is their running smoothness and their extremely low noise development. A very important factor is certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution that you will hardly actually hear.
The overall concept offers you many more practical product characteristics and benefits. Included in these are the significantly higher performance of the helical-worm combinations instead of single helical-worm gear systems. This is how you save additional energy in the procedure of your systems and so are able to noticeably decrease ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your person requirements – with an array of AC motors. In addition, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits provided by this combination of low-noise helical-worm equipment unit and performance-optimized engine. Even greater variance may be accomplished because of the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving time and money with this selection and task planning. It is because our modular system allows a multitude of combination options for gear systems and motors. You can consequently reduce operating costs, count on an extended service life and benefit from simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with our AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional toughness and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Because of their outstanding effectiveness, these drives can be utilized in every commercial sector and customized to person torque and quickness requirements. The decrease ratios afforded by the helical-worm equipment stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel material with unique lubricants, optimized shape, this powerful motor achieves high levels of performance and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and surface worm gears: Provides higher efficiencies and higher torque capability in smaller sizes.
Multiple Input Options: Essential gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Keeps contaminants and water away.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new requirements for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration at this point and a truly future proof alternative. The EP gear motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in option positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
EP gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is dirt tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique combination of optimized worm wheel materials with special lubricants and optimized shape, this powerful geared motor achieves high levels of performance and torque. The reduced contour design makes it suitable for implementing applications electronic.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The use of condition of the art helical and worm gear combinations affords optimum efficiency fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All units adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternate for the standard tasks expected of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC engine are directly flange mounted, the pinion is upon the electric motor shaft. This integrated compact design is an essential element for the high accuracy and the amazing stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision floor. The worm tires are made from special wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal style. The housings are produced from high quality cast iron. The rugget walls and internal ribbing ensure extremely torsional stiff and noise dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Have you thought about helical worm gear motor as a normal part of your life?

Tags:

Gearbox-worm

As one of leading gearbox worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox worm

Recent Posts