Select Page

China best Good Price for Nmrv (FCNDK) Series Worm Gearbox with Output Flange Size 25-150 car gearbox

Product Description

 

Product Parameters

Editing and broadcasting of main materials

1. Body, die-casting aluminum alloy;

2. Worm shaft, 20 Crq steel, high temperature treatment;

3. Worm gear, nickel bronze alloy;

4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;

5. Cast iron body, painted with bIu RA5571.

Regular center distance specification editing and broadcasting

Center distance: 130 (unit: mm).

Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)

Detailed Photos

 

NMRV-063-30-VS–AS-80B5-0.75KW-B3

NMRV

Means hole-input with flange

NRV

Means shaft-input without flange

063

Centre-to-centre spacing of worm-gear speed reducer

30

ratio

VS

Double input shaft

F1(FA)

Flange putput shaft

AS

Single output shaft

AB

Double output shaft

PAM

 

80B5

Motor mounting facility

0.75KW

 

B3

Mounting position

N2

NRV571

NRV030

NRV040

NRV050

NRV063

NRV075

NRV090

NRV110

NRV130

400

390

530

1571

1400

1830

2160

2390

3571

3950

250

460

620

1200

1650

2150

2520

2800

3530

4610

150

550

740

1420

1960

2450

2990

3310

4180

5470

100

630

850

1620

2250

2910

3430

3800

4790

6260

60

740

1000

1920

2660

3450

4060

4500

5680

7420

40

850

1150

2200

3050

3950

4650

5150

6500

8500

25

990

1350

2570

3570

4620

5440

6571

7600

9940

10

1350

1830

3490

4840

6270

7380

8180

10320

13500

 

 

 

 

 

 

 

 

 

 

A

50

65

84

101

120

131

162

191

203

B

38

50

64

76

95

101

122

151

163

Use and safety guarantee

1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

worm gearbox

Can a Worm Gearbox be Used for High-Speed Applications?

Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:

  • Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
  • Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
  • Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
  • Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.

While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.

worm gearbox

Diagnosing and Fixing Oil Leakage in a Worm Gearbox

Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:

  1. Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
  2. Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
  3. Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
  4. Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
  5. Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
  6. Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
  7. Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
  8. Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
  9. Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
  10. Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.

If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.

worm gearbox

Advantages of Using a Worm Reducer in Mechanical Systems

Worm reducers offer several advantages that make them suitable for various mechanical systems:

  • High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
  • Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
  • Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
  • Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
  • High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
  • Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
  • Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.

Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.

China best Good Price for Nmrv (FCNDK) Series Worm Gearbox with Output Flange Size 25-150   car gearbox	China best Good Price for Nmrv (FCNDK) Series Worm Gearbox with Output Flange Size 25-150   car gearbox
editor by CX 2024-03-07

Gearbox-worm

As one of leading gearbox worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox worm

Recent Posts